944 tape primer for atuto car interior quiet silent door and windows rubber seal

CNHYBOND 944 Tape primer/Promote adhesion/adhesion promote Technical Data Product Description CNHYBOND 944 Tape primer

CNHYBOND 944

Tape primer/Promote adhesion/adhesion promote

Technical Data

Product Description

CNHYBOND 944 Tape primer can be used to promote adhesion of double side adhesive(such as 3M VHB,  3M9080 , 3M9448 , Japan 5000NS, SONY T4000 , T4720 , TESE4940 etc.) to surfaces such polypropylene,EPDM,TPU,ABS,PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. IT is success replace : 3M K-500,3M K-520,3M 4298,,3M 94,3M4298

Typical Physical properties and Performance Characteristics

Note:The following technical information  and data should be considered representative or typical only and should not be used for specification purposes

Solids:              Approximately 5%-8%

Color:              clear light yellow

Flashpoint:          -4°F(-20°C)

Net Weight:         780-800grams per liter

Viscosity:           40±5cps

Application Techniques

Surface preparation:

The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.

Application:Shake CNHYBOND 944 primer well before using:

Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..

Allow first application of primer  to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment 

Application Techniques

Surface preparation:

The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.

Application:Shake CNHYBOND 944 primer well before using:

Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..

Allow first application of primer  to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment

944 tape primer for atuto car interior quiet silent door and windows rubber seal