- Contact Person : Mr. YONG LI
- Company Name : Shenzhen Evopute Industry Material Company Limited
- Tel : 86-0755-27386648
- Fax : 86-0755-27394730
- Address : Guangdong,shen zhen,Block 7,San xing industry,fu yong town,shen zhen city,guang dong province,china
- Country/Region : China
- Zip : 518101
Related Product Searches:277adhesion promote for double side adhesive,High Quality,primer, silicone rubber primer
277 primer for PP,PE,EPDM
Promote Adhesion for double side adhesive
:Product Description :
277 promote adhesion can be used to promote adhesion of double side adhesive tapes to surfaces such
polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal
and painted metal surfaces.
IT is success replace : 3M C-100,3MN-200,3M K-500,3M K-520,3M 4298,3M S151,3M V720,3M 94,3M4298
2:Typical Physical
Properties and
Performance
Characteristics
Technical Data June, 2008
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
Solids: Approximately 6%
Color: Clear light yellow – clear dark orange
Flashpoint: -4°F (-20°C) O.C.
Coverage: 600 sq. ft. (211 sq. m/l) per gallon
Net Weight: 750 grams per liter
Viscosity: 35 ± 5 cps.
3:Application Techniques Surface Preparation:
he bonding surface must be relatively clean and dry.
Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and
water mixture. A clean lint-free cloth should be used.
4:Application:
Apply a thin uniform coating
to the bonding surface using the minimum amount that will fully coat the surface.
Allow 277 primer to dry thoroughly before applying tape. This is usually
accomplished in 5 minutes at room temperature. Be sure the primed surface
remains free from contaminants prior to applying the tape. Porous surfaces may
require 2 applications of 277primer for uniform coverage and good adhesion.
Allow first application of primer to dry before applying the second coat.
277 primerr may be applied with brush or swab. It can also be applied with a pressurized
flow gun, knurled roller or other similar type of application equipment.
5:Clean up:
277 primer can be removed with isopropyl alcohol. Vigorous
scrubbing may be required.
6:Note: Carefully read and follow manufacturer’s precautions and directions for use
when handling cleaning solvents.
277adhesion promote for double side adhesive